Menu

Clip-X
PROSTILTadvance 2.0

or tiles and slabs, incl. Würth stainless steel screws3.9 x 16 mm
Material
Fibre-reinforced plastic
Version
Set 50
Format
3,9 x 16 mm
Flooring/area of application
for tiles and slabs
Accessories
incl. Würth stainless steel screws3.9 x 16 mm
Item No.:
78354
General product information
The principle of PROSTILTadvance 2.0 is quickly explained. The 2.40 m long basic pro-files, which are available in two colours, can be extended as required using the PROS-TILTadvance 2.0 longitudinal connector. The PROSTILTadvance 2.0 cross connector or the PROSTILTadvance 2.0 variable connector is used for the cross connection. You can position and lock the cross connector at any point* in the groove of the base profile in order to be able to connect a base profile there as well. This principle can be conti-nuously extended in length and width. Finally, the supporting structure is placed on the PROSTILTadvance 2.0 adjustable feet, which can build up the terrace at heights between 11 and 370 mm. The possible difference in height allows levels to be set down and steps to be formed. The high load-bearing capacity of the PROSTILTadvance 2.0 supporting structure also enables large spans and thus significantly fewer support points than with conventional substructures.
Article details
The Clip-X made of glass fibre-reinforced plastic serves as cross joint when laying ceramic, natural stone or concrete stone slabs. It is equipped with a base plate and with Würth stainless steel drilling screws. The Clip-X is designed in such a way that it can be adjusted in the longitudinal axis as well as the transverse axis in the groove of the base profile. These adjustment options enable simple adjustment of the dimensional tolerances in the named covering materials. This flexible adjustment option is patent-pending. Furthermore, the Clip-X has pre-determined breaking points at the joint bridges forming the cross joint, to simply break off the joint bridges (e.g. with combination pliers). Depending on the installation type, the breaking off of the bridges is required, i.e. when laying the slabs in half or third bond, in order to realise the look of the selected installation type.
Accessories
Alternative items
To the Items